17
3. DATA setting
1. Or press the [MENU] key twice.
2. Set the sampling interval to 1 s.
Press the MENU key and the direction key to display the DATA setting screen.
3.
Set the capture destination to the SD
CARD, and the file name to CSV.
For the file name setting (arbitrary, serial number) refer to the operation manual of
the main unit.
If Name Type is set to Auto, the file is created with the name containing the last
two digits of the year, the month, and the day. To confirm the setting, press [OK]
4. When you are done, press the [QUIT] key to finish the DATA setting.
To Next Page
Loading...
