GRAPHTEC GL980 - Table of Contents

Contents
Thank you for choose the midi LOGGER GL980.
This Quick Start Guide describes the basic operations.
Please refer to the manual (PDF) in the CD-ROM for more information.
The explanation on how to use the ferrite core, tilt stand, and M3.5 screw
can be found in the manual above. Please refer to them.
Nomenclature ……………………………………………………… 2
Connection Procedures ……………………………………………3
Precautions to Observe When Taking Measurementt ………… 5
Descriptions of the Control Panel Keys ………………………… 6
Descriptions of the Menu Screens …………………………… 10
Measurement Procedure…………………………………………14
1. Preparation for measurement ………………………………………………… 14
2. AMP setting …………………………………………………………………… 15
3.
DATA setting ……………………………………………………………………17
4.
Recording and stopping ……………………………………………………… 18
5.
Playback method ………………………………………………………………19
Specifications ………………………………………………………20
Standard Specifications …………………………………………………………20
Specification of input section …………………………………………………… 21
Specification of
Input/Output section …………………………………………… 22
Installation Guide …………………………………………………22
After unpacking, check the GL980's Exterior to make sure that
there are crack or other damage before use.
• Quick Start Guide : 1 • Ferrite core: 4 • CD-ROM : 1
• AC cable/AC adapter : 1 • Tilt stand: 1 set
• M3.5 screws: 1 set • Notes for Safe Operation: 1
Checking the Outer Casing
Checking the Accessories
1