GRAPHTEC GL980 - Descriptions of the Control Panel Keys

6
Moves CH and item in monitor display.
Use keys of CH SELECT to move up and down.
This section describes key operation.
1. CH SELECT
Press this key to change the time axis display width.
3. TIME/DIV
Switches the information in the monitor display.
This is used to change the settings related to waveform.
2. SPAN/TRACE/POSITION
Press this key to open the setting window. Each time you press the key, the setting window
changes as follows.
AMP
→
DATA
→
DISP
→
TRIG
→
I/F
→
OTHER
4. MENU
Descriptions of the Control Panel Keys
(2) SPAN/TRACE/POSITION
(1) CH SELECT
(3) TIME/DIV
(4) MENU
(5) QUIT
(6) DIRECTION KEYS
(7) ENTER
(8) FAST FORWARD
(KEY LOCK)
(9) START/STOP
(USB DRIVE MODE)
(10) REVIEW
(12) CURSOR (ALARM CLEAR)
(13) FILE
(14) FUNC
(11) DISPLAY