10
Descriptions of the Menu Screens
：
: Appears when neither capture nor replay is in progress.
: Displayed when the captured data is being recorded.
: Appears when waiting for a trigger during capturing and for the stop key after capturing.
: Displayed when replaying the captured data.
: Displayed when replaying during capturing the data (Refer to in “3.2 Key Operation” - “(10) REVIEW”.).
: Internal memory is recognized but is not being accessed.
: Internal memory is being accessed. While the internal memory is being accessed, the POWER LED also flashes.
Please do not turn Off the power and do not remove the SD card or USB memory when the status mark indicates
other than “STOP”. The data is damaged, and it will not be accessable.
Please start the operation after making sure that the status mark is switched to "STOP".
4. Device access display
(Internal memory)
5. Device access display
(SD card)
6. Device access display
(USB memory)
15. Level bar
17. Scale lower limit
17. Scale upper limit
Status message display area
Time/DIV display area
Status mark
Device access display (Internal memory)
1.
2.
3.
4.
: Displays the operating status.
: Displays the current time scale.
: Displays the status mark.
13. Internal RAM
information
1. Status message display area
2. Time/DIV display area
3. Status mark
7. Remote lamp
8. Key lock display
9. Clock display
10. AC/Battery status indicator
11. Digital display area
12. Quick settings
14. Alarm display area
16. File name display area
19. Data capture bar
18. Waveform display area
To Next Page
Loading...
