11
: SD card is not attached.
: SD card is attached but not being accessed.
: SD card is accessed. Do not remove SD card. The POWER LED light also flashes while the SD card is
being accessed.
: USB memory is not attached.
: USB memory is attached but not being accessed.
: USB memory is accessed. Do not remove USB memory. The POWER LED light also flashes while the
USB memory is being accessed.
: Indicates local mode. Operations can be conducted on this device.
: Indicates remote mode. With some exceptions, operations must be conducted on a PC.
: Not in key lock status. Normal operations are permitted
: Key lock status. All the keys are locked.
Please do not remove the SD card and do not turn Off this device’s power when accessing the SD card.
The data is damaged, and it will not be accessable.
Please do not remove the USB memory and do not turn Off the power when accessing the USB memory.
The data is damaged, and it will not be accessable.
When you cancel the connection on the application (GL980_2000-APS), this device automatically rerturns to local
mode. If local mode is not entered, press the [QUIT] key.
For details of the key lock, refer to "3.4 Setting Menus" - "(14)Key lock release with password".
Device access display (SD card)
Device access display (USB memory)
Remote lamp
Key lock display
5.
6.
7.
8.
To Next Page
Loading...
