GRAPHTEC midi LOGGER GL220 - Measurement Procedure; Preparations: How to Make the Preparations Required for Data Capture

GL220 Measurement Procedure
1. Preparations : How to Make the Preparations Required for Data
9
In this section we will provide a simple explanation of the data capture procedure:
Preparations -> Setup -> Data Capture -> Data Replay.
Voltage measurement is performed here.
Purpose of data capture : To measure the temperature of the target objects
Temperature Range : T Thermocouple
Voltage range : 1V
Sampling interval : 1 sec
Data save destination : Internal memory device
Measurement
object
1.Connect Thermocouple to the CH 1 terminal (Temperature).
2.Connect wire to the CH 2 terminal (Voltage).
3.Connect the AC power supply.
4.Turn on the power supply.
12
3
4
Connect securely!