GRASS VALLEY K2 - Working with the K2 Coder

34 K2 Storage System Version 3.2.74 Release Notes October 19, 2008
Working with the K2 Coder
Working with the K2 Coder
This section contains the following topics:
• “About the K2 Coder”
• “Installing the K2 Coder”
• “Configuring the K2 Coder”
• “Using the K2 Coder”
About the K2 Coder
The K2 Coder is a K2 appliance. It transcodes media formats not otherwise supported
on the K2 system. The K2 Coder works in both directions. It transcodes files into the
K2 Storage System and it transcodes K2 clips out of the K2 Storage System, as
illustrated below.