6 K2 Storage System Version 3.2.74 Release Notes October 19, 2008
Feature limitations in this release
Feature limitations in this release
The following information applies to the K2 Storage System. Refer to the K2 Media
Client Release Notes for similar information that applies to the K2 Media Client.
• There is no centralized logging of the K2 Storage System. Logs are stored on each
individual device.
Changes in previous releases
The following sections describe the changes in past releases.
Version 3.2.58
• Catch server support — The K2 Capture Service provides features for
automatically importing media from DG and Pathfire catch servers. Refer to the K2
Media Client System Guide for procedures.
•
Control point PC — The Grass Valley control point PC is now on the Dell 830
platform. To make a recovery disk image, you must use recovery CD 063-8245-03.
•
Lx0 RAID can expand L2 RAID — If you have a K2 Storage System with L2 RAID,
you can expand it using Lx0 RAID.
•
Media File System — Upgrade to version 3.0.3b.56 SNFS (StorNext File System)
software is required. This is the media file system software.
•
Level 35 — An additional pre-defined level is available for the K2 Storage System.
Refer to the relevant sections later in this document.
•
Documentation for this 3.2.74 release — The following manuals have been revised
for this release:
The revised manuals are on the December 2007 K2 Documentation CD, part
number 063-8244-05, labeled “Software version 3.2”.
Version 3.2.56
• K2 Storage System levels 10, 20, 30 — A new storage infrastructure is available with
Monitoring the K2 Level 2 and Level 3 RAID with NetCentral 071-8467-01
K2 Media Client Service Manual 071-8468-06
K2 Media Client Quick Start Guide for SDA-00 models 071-8576-02
K2 Storage System Level 10 Cabling Guide 071-8596-01
K2 Lx0 RAID Instruction Manual 071-8614-01
K2 InSync User Guide 071-8529-01
Document Part number
K2 Media Client Service Manual 071-8468-04
K2 Media Client System Guide 071-8460-04
Document Part number