52 K2 Storage System Version 3.2.74 Release Notes October 19, 2008
Known problems
Known problems
The following limitations are present in this 3.2.74 release of the K2 Storage System.
If you wish to obtain more information about these limitations, please mention the
reference numbers that follow the description of each limitation.
Generic iSCSI
Clients
Description: When installing K2 Generic iSCSI Client software, a message informs that
SNFS is not installed and the installation program does not proceed.
(CR97009)
Workaround: Make sure that the correct version of SNFS is already installed, then do the
following:
1. Click Start | Programs | SNFS File System | Stop File System Services.
2. Click Start | Programs | SNFS File System | Start File System Services.
3. Install K2 Generic iSCSI Client software.
K2 Appliances
Description: The K2 ASI Media Client is not configured to the correct K2 directory.
(CR97559)
Workaround: In the K2 ASI Media Client Video Client application, click Options | Add FTP
connection. The FTP Server Configuration dialog box opens. For Ftp
subdirectory, enter v:/mpg/default.
Description: The K2 ASI Media Client does not have the movie user account. (CR97358)
Workaround: 1. Create user account “movie” if it doesn’t already exist.
2. For the movie account, enter password “M0vieK2M0vie”. That is M ZERO
v i e.
3. Add user “movie” to both Administrator & K2 Administrator groups.
4. Change the logon of user “Nexus Server” service from Local System
Account to account “movie” and password “M0vieK2M0vie”.
Description: On K2 ASI Media Client startup, a Found New Hardware wizard opens, but the
hardware is unknown and the wizard does not finish successfully. (CR97560)