GRASS VALLEY K2 - K2 Media Server Pre-Installed Software; Operation Considerations

50 K2 Storage System Version 3.2.74 Release Notes October 19, 2008
K2 Media Server pre-installed software
f. On the Hardware Installation page, click Continue Anyway.
g. Click
Finish.
6. Make the following registry settings:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service
s\Lsi_fc\Parameters\Device]
"DriverParameter"="MPIOMode=2"
"MaximumSGList"=dword:000000ff
"NumberOfRequests"=dword:000000ff
K2 Media Server pre-installed software
The following software is pre-installed on the K2 Media Server when you receive it
new from Grass Valley.
Operation considerations
• Do not neglect to make a “first birthday” disk image shortly after the K2 Media
Server is installed and configured. Refer to the K2 Storage System Instruction
Manual for procedures. If there are multiple generic disk images on the E: partition,
you should delete un-needed images to make room for the first birthday image.
Refer to “Using generic recovery disk images” on page 47.
• If you are using the Grass Valley control point PC, you should also make a first
birthday image of the control point PC. Use a compatible version of the recovery
CD, as specified in “Recovery CD compatibility” on page 15. Refer to the
instruction in the K2 Media Client Service Manual for creating a recovery disk
image.
Software Version Software Version
Adobe Reader 8.0 MS J# Redistributable
Package
1.1
QuickTime 7 MS SQL 2005 SP2
ATI Display Driver 8.24.3.0 MS XML 6.0
Dell OpenManage 5.3.0 OSA BMC Management
Utility
—
Dell OpenManage Array
Manager
5.3.0 SQL XML 4 -
9.00.3042.00
Dell OpenManage IT
Assistant
5.3.0 StorNext 3.1.2.RC252
25.6138
Intel Pro Network
Adapters & Drivers
12.2 Windows Server 2003 SP2
IT Assistant 6.5 SP3 Windows PowerShell 1.0
J2SE Runtime
Environment
6, Update 3 Microsoft .NET
Framework
3.5 SP1
SiteConfig Network
Configuration Connect Kit
1.0