KARRERA — User Manual 241
E-MEM & Timeline Operation
3. Touch the Enable button of any sub-level to disable that sub-level
(
Figure 122) from being included in the current E-MEM register.
Figure 122. Timeline & Edit, Enables (Define) Menu
4. Repeat Steps 1-4 for each level you wish to create Partial Keyframes for
and include in an effect.
5. Learn the Partial Keyframe enabled effect to a register by pressing and
holding down the
Lrn button on the Local/Master E-MEM area and
selecting a register.
Note Once any sub-levels have been disabled, the Lrn button in the Local and
Master E-MEM area will be colored Cyan (light blue) to reflect a partial key-
frame is present in the timeline of the effect; the default is white. Pressing and
holding the cyan Lrn button while pressing a register button forces any Partial
Keyframes to be part of that E-MEM. If the cyan Lrn button is not held when
a register button is pressed, any Partial Keyframes will not be part of that E-
MEM register and they will no longer exist. The register will learn a default
state with all sub-levels enabled and any ‘defined’ sub-levels disabled.
The delegate buttons (left of enable buttons) can be turned on/off to
delegate/undelegate sub-levels when inserting or modifying key
-
frames (Figure 122).
To Next Page
Loading...
