Commissioning
you have to set programming type, date and time.
PROG TYPE
DAY
MONTH
YEAR
HOUR
MINUTE
DONE
1. Connect the programmer to power.
The preset PROGRAMMING TYPE and OK.
Depending on the product you can choose between three different
1)
1)
.
Daily You can program all weekdays (Monday -
Sunday) with the same ON/OFF time schedule
Weekly
1)
You can program each day (Monday, Tuesday,
...) with a different ON/OFF time schedule
Week-Weekend
1)
You can program Monday - Friday with a ON/
OFF time schedule and Saturday - Sunday with
a different one.
Choose your desired programming type (DAILY,
1)
,
1)
), or .
Preset value DATE
3. Enter day,
or .
Preset value MONTH
Enter month,
or .
Preset value YEAR
Enter year,
or .
Preset TIME
Enter hour,
or .
Preset value MINUTE
Enter minute,
or .
The date and time are saved.
The programmer goes to RUN mode.
To Next Page
Loading...
