Grasslin Talento 471 plus - Cycle Programming; Understanding Cycle Programming; Cycle Programming Rules

25
GB
Prog.
Cycle programming
9.00 h 17.00 h
Length
Pause
Cycle length
Start time
Channel OFFChannel ON
A cycle switching command consists of: · Start time
· Length = ON switching period
· Period = ON switching period + pause)
· Cycle length = Length of time between channel ON and
channel OFF
Info
The time period between the start and end times must not be less than the period length.
An interlacing of cycle programs is not permitted.
Examples
The device is switched on for 10 minutes every 60 minutes between Monday 9.00 am and Friday
7.00 pm.
Start time Monday 9.00 am
ON switching period 10 min.
Cycle length 60 min.
End time Friday 7.00 pm
B
Period