Installation of the components
On Fig. (4) and Fig. (5) you can see the actual installation of motors, servos, Li-Po battery pack
and "4 in 1" control box in the helicopter’s main frame.
Fig. (4): Left side view of the helicopter
1. Upper rotor 2. Lower rotor 3. Swashplate 4. Motors 5. Li-Po battery pack 6. "4 in 1" control box
Fig. (5): Right side view of the helicopter
1. Upper rotor 2. Lower rotor 3. Swashplate 4. Motors 5. Servos 6. "4 in 1" control box
To Next Page
Loading...
