GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
- 9 -
Glue in the pilot, and glue on the cockpit canopy with UHU ALL PURPOSE
ADHESIVE Power; hold in place with tape.
Undercarriage
Included standard in the package is a rigid undercarriage; the model can also be
equipped with a retractable undercarriage (Order No. 193.3; of which 2 are
required). No additional servo is needed for the electric retractable undercarriage.
When using the connecting cable (Order No. 3936.32), only one receiver output is
required.
Caution: If you want to install only the rigid undercarriage, do not remove the
covering sheet over the cutout for the retractable undercarriage on the underside of
the wings. (See following assembly step photo.)
The figure shows how the undercarriage struts are inserted into the mounting block.
The covering sheet for the mounting block has been separated.
Glue in the completely pressed in undercarriage struts; secure with an attachment
tab and two Ø 2.2x12 metal screws as shown. Push on the wheel with the protruding
wheel hub facing the strut; then secure it with 2 plywood spacers.
To Next Page
Loading...
