To Next PageTo Next Page
Need help?Do you have a question about the Gravely 991091 and is the answer not in the manual?
General| Model | 991091 |
|---|---|
| Engine Displacement | 725cc |
| Cutting Width | 52 inches |
| Cutting Height Range | 1.5 - 5 inches |
| Transmission Type | Hydrostatic |
| Turning Radius | Zero-turn |
| Deck Material | Steel |
Provides an understanding of safety instructions, controls, operation, and maintenance.
Guidance on ordering parts and making service inquiries using model/serial numbers.
Explains safety alert symbols, signal words, and machine decals for warnings.
Covers DANGER, Amputation, and Discharge hazards requiring critical attention.
Addresses Tipping, Service, Bystander, and Loss of Traction hazards during operation.
Focuses on operator age, child presence, personal protection, and pre-operation checks.
Steps and checklist for assembling the unit after unpacking.
Identifies key controls like steering levers, ignition switch, throttle, and PTO.
Explains steering levers, ignition, choke, throttle, bypass, PTO, and lift controls.
Guides on starting the engine, mowing, and safe stopping procedures.
Tasks to perform before or after each use, like safety checks and cleaning.
Maintenance tasks based on operating hours, including blade checks and lubrication.
Instructions for placing the unit in a service position for maintenance.
Procedures for checking, adding, and changing hydraulic fluid and filter.
Steps for removing, replacing, and sharpening mower blades.
Guidelines for storing the unit properly for both short and extended periods.
Details model numbers, dimensions, weight, and tire specifications.
Covers speed, turning radius, engine, transmission, and deck specifications.
Outlines product warranty periods, special extensions, and exclusions.
Explains customer duties for warranty service, including maintenance and notification.
