Gravely Pro-Turn ZX 52 User Manual (English)

Questions and Answers:

C
Casey NguyenAug 22, 2025
How to troubleshoot starting issues in my Gravely Pro-Turn ZX 52 Lawn Mower?
- D
  Darrell JohnsonAug 22, 2025
  If your Gravely Lawn Mower engine won't start, several factors could be at play. First, the safety interlock system might not be engaged or could be faulty, so you should check it. The fuel tank may be empty, requiring you to fill it. Contaminated fuel can also prevent starting, so replace it with clean fuel. A discharged battery is another common cause, so ensure it is charged. Also, check the connection between the battery and cables, tightening or cleaning them as necessary. Finally, loose spark plug wires or faulty plugs can be the culprit; connect the wires or replace the spark plugs.
R
richardsnyderSep 1, 2025
What to do if my Gravely Pro-Turn ZX 52 Lawn Mower engine overheats?
- B
  Barbara MorganSep 1, 2025
  If your Gravely Lawn Mower engine is overheating, it could be due to low engine oil level, so add more oil. Another cause might be plugged cooling fins, which require cleaning.
K
kaylaschroederAug 31, 2025
How to fix a Gravely Pro-Turn ZX 52 Lawn Mower that does not drive straight?
- K
  Kimberly AllenAug 31, 2025
  If your Gravely Lawn Mower does not drive straight, it could be due to incorrect tire pressure, so check the tire pressure. Also, the steering levers may need adjustment.
T
Travis SmithAug 30, 2025
What to do if my Gravely Pro-Turn ZX 52 Lawn Mower won't drive?
- D
  Douglas BrownAug 30, 2025
  If your Gravely Lawn Mower does not drive, make sure that the transaxles are engaged by their levers. If the levers are engaged, but the unit still doesn't drive, the transaxle drive belt may be faulty, or the transaxles themselves may be faulty, in which case you should contact your Gravely dealer.
B
Beth RamirezAug 28, 2025
How to troubleshoot starting issues with my Gravely Pro-Turn ZX 52?
- K
  kevinleonAug 29, 2025
  If your Gravely Lawn Mower engine doesn't start, there are several potential causes. First, the safety interlock system might not be engaged or could be faulty. Also, the fuel tank could be empty, or the fuel supply might be contaminated, requiring replacement with clean fuel. The battery could be discharged, needing a charge. A loose connection between the battery and cables can also prevent starting, so ensure they are tightened and clean. Spark plug wires might be loose, or the spark plugs themselves could be faulty, requiring connection or replacement. In some cases, the electrical system or the engine itself might be faulty, in which case you should contact your Gravely dealer.
J
Jason RobertsonAug 27, 2025
What to do if my Gravely Pro-Turn ZX 52 Lawn Mower does not drive?
- H
  hpatelAug 27, 2025
  If your Gravely Lawn Mower isn't driving, check if the transaxles are bypassed and engage the levers.
L
lisa82Aug 26, 2025
What causes PTO malfunctions in my Gravely Pro-Turn ZX 52?
- T
  Terri HinesAug 27, 2025
  PTO malfunctions on your Gravely Lawn Mower can occur if the operator presence switch is not engaged; activate it by sitting on the operator seat. Also, the PTO belt could be faulty and need replacement.
J
Jason JohnsonAug 25, 2025
Why does my Gravely Pro-Turn ZX 52 engine run rough?
- D
  dharrisAug 26, 2025
  A rough-running engine in your Gravely Lawn Mower can stem from a few causes. Check if the choke control knob is in the 'on' position and move it to 'off'. Also, a plugged air filter cartridge can cause this issue, so clean or replace it.
C
Christopher RayAug 25, 2025
Why is the cutting quality poor on my Gravely Lawn Mower?
- J
  jose23Aug 25, 2025
  If your Gravely Lawn Mower isn't cutting well, several factors could be responsible. The mower blades might not be level, or the deck pitch could be incorrect; level and adjust them. Dull or faulty blades will also cause poor cutting, so sharpen or replace them. If you're mowing too fast, try driving slower. Poor belt tension or condition can also affect cutting quality, so replace the mower belts. Avoid setting the cutting height too low, and for very tall grass, consider mowing twice.

Gravely Pro-Turn ZX 52 Specifications

General

Engine Power	23 hp
Engine Displacement	726 cc
Cutting Width	52 inches
Cutting Height	1.5 - 5 inches
Deck Type	Fabricated
Deck Thickness	7 gauge
Spindle Material	Aluminum
Transmission	Hydro-Gear ZT-3400
Forward Speed	10 mph
Reverse Speed	5 mph
Engine	Kawasaki
Wheel Size	11 in front / 22 in rear
Turning Radius	Zero-turn
Warranty	4 years