Engine Manual 26
XI. Warranty CONTINUED
WARRANTED PARTS
The repair or replacement of any warranted part otherwise
eligible for warranty coverage may be excluded from such
warranty coverage if Ariens Company demonstrates that
the engine or equipment has been abused, neglected, or
improperly maintained, and that such abuse, neglect, or
improper maintenance was the direct cause of the need for
repair or replacement of the part. That notwithstanding, any
adjustment of a component that has a factory installed, and
properly operating, adjustment limiting device is still eligible
for warranty coverage. The following emission warranty
parts lists are covered if factory installed:
(EPA: subsection 4)
(1) Fuel Metering System
(i) Carburetor and internal parts (and/or pressure
regulator or fuel injection system)
(ii) Air/fuel ratio feedback and control system
(iii) Cold start enrichment system
(2) Air Induction System
(i) Controlled hot air intake system
(ii) Intake manifold
(iii) Air filter
(3) Ignition System
(i) Spark Plugs
(ii) Magneto or electronic ignition system
(iii) Spark advance/retard system
(4) Exhaust Gas Recirculation (EGR) System
(i) EGR valve body, and carburetor spacer if applicable
(ii) EGR rate feedback and control system
(5) Air Injection System
(i) Air pump or pulse valve
(ii) Valves affecting distribution of flow
(iii) Distribution manifold
(6) Catalyst or Thermal Reactor System
(i) Catalytic converter
(ii) Thermal reactor
(iii) Exhaust manifold
(7) Particulate Control Traps
(i) Filters, precipitators, and any other device used to
capture particulate emissions
(8) Miscellaneous Items Used in Above Systems
(i) Vacuum, temperature, and time sensitive valves and
switches
(ii) Electronic controls
(iii) Hoses, belts, connectors, and assemblies
(9) Evaporative Emissions Components
(i) Fuel Line
(ii) Fuel Line Clamps
(iii) Fuel Tank and Fuel Cap
(iv) Carbon Canister and connecting parts
(v) ROV
To Next Page
Loading...