Need help?Do you have a question about the GRE PSR-282 and is the answer not in the manual?
Lists and briefly describes key features like Liquid-Crystal Display, One-Touch Search Banks, Priority Channel, and more.
Covers the process of installing AA batteries into the scanner's battery holders.
Details the built-in charging circuit and requirements for charging rechargeable batteries.
Explains how to power the scanner using an optional AC adapter and standard AC outlet.
Guides on powering the scanner using an optional DC adapter connected to a vehicle's power source.
Details attaching the supplied antenna, outdoor antennas, and connecting earphones/headphones.
Provides traffic safety advice and guidance on using the belt clip for carrying the scanner.
Explains the function of each key on the scanner's keypad, including search and programming keys.
Describes the meaning of various indicators shown on the scanner's display during operation.
Explains banks as storage areas for groups of channels, with 10 banks of 20 channels each.
Details preprogrammed frequency groups for quick searching by service type.
Guides on turning on the scanner and setting volume and squelch levels for optimal reception.
Instructions on how to store known frequencies into the scanner's memory channels.
Explains how to search preset frequencies within the scanner's One Touch Banks.
Details how to tune through receivable frequencies starting from a specified point.
Instructions on how to scan stored channels and monitor activity.
Covers turning channel-storage banks on/off and monitoring individual stored channels.
Provides steps to clear a stored frequency from a channel in the scanner's memory.
Explains how to program a 2-second delay to avoid missing replies on busy channels.
Details how to lock out unwanted channels or frequencies to speed up scanning.
Instructions on reviewing, removing lockouts from specific banks, and all frequencies.
Describes how to set a priority channel to check for activity every 2 seconds during scans.
Explains how to control the display backlight and audible key press tones.
Explains how to lock the keypad and methods to identify image frequencies affecting reception.
Steps for resetting the scanner to resolve operational issues and initializing for a full data clear.
Explains birdie frequencies as internal receiver signals that can interfere with reception.
To Next Page
General
