Need help?Do you have a question about the GRE PSR-295 and is the answer not in the manual?
Store up to 100 channels in each of 10 banks for easier identification.
Restrict reception to specific subaudible tone or data codes for clearer reception.
Virtually eliminates interference from intermediate frequency images for clear reception.
Search for transmissions within preset or user-defined frequency ranges.
Scans up to 60 channels/sec and searches up to 75 frequencies/sec for quick finding.
Set a channel to check every 2 seconds to avoid missing important transmissions.
Details the three available power sources for the scanner: batteries, AC, and vehicle DC.
Instructions for powering the scanner using four AA batteries, recommending alkaline types.
Explains how to charge Ni-MH or Ni-CD batteries using the scanner's built-in circuit.
Instructions for powering the scanner using a standard AC adapter.
Instructions for powering the scanner using a vehicle's 12V power source.
Step-by-step guide to powering on the scanner and adjusting the squelch level.
Instructions for storing known frequencies into the scanner's memory channels.
How to program channels for CTCSS or DCS operation to filter transmissions.
Explains how CTCSS/DCS codes filter transmissions and how to program them.
Soft reset procedure to resolve minor issues without clearing memory.
Hard reset procedure that clears all stored memory and returns to factory defaults.
To Next Page
General
