In addition to common household tools, here is the list of
items used to build the Escapade.
❏ 30-minute epoxy (GPMR6047)
❏ 1/2 oz. Medium CA+ (GPMR6007)
❏ Hobby knife (HCAR0105)
❏ #11 blades (HCAR0211)
❏ Builder's triangle (HCAR0480)
❏ Drill and 1/16" drill bit
❏ Cellophane tape (for hinging elevator and rudder)
❏ Double-sided foam tape (GPMQ4440) for mounting
receiver and speed control
❏ Sandpaper and sanding block
❏ Soldering iron and electrical solder
❏ Modeling paint and paintbrush for painting pilot
(optional)
❏ Small Phillips screwdriver (#1)
❏ Small T-pins (HCAR5100) or craft pins
Building Supplies
6
1/64" = .4mm
1/32" = .8mm
1/16" = 1.6mm
3/32" = 2.4mm
1/8" = 3.2mm
5/32" = 4mm
3/16" = 4.8mm
1/4" = 6.4mm
3/8" = 9.5mm
1/2" = 12.7mm
5/8" = 15.9mm
3/4" = 19mm
1" = 25.4mm
2" = 50.8mm
3" = 76.2mm
6" = 152.4mm
12" = 304.8mm
15" = 381mm
18" = 457.2mm
21" = 533.4mm
24" = 609.6mm
30" = 762mm
36" = 914.4mm
Metric Conversions
To convert inches to millimeters, multiply inches by 25.4
To Next Page
Loading...
