24
8. Disassembly procedures
8.1 Operation procedures/pictures (Disassembly procedures for indoor unit)
8.1.1 Disassembling the front panel assy
Lift the front panel upward. Pull the panel
outward with strength along the grooves
that fix the front panel and take it out. (As
shown in Fig.8-1)
Take out the three screw covers and screw
off the three pieces of tapping screws.
Then use screwdriver to push up the clasp
that is fixed into the panel body at its back
inward and take off the front panel
assy.(As shown in Fig.8-2)
Front panel
Filter
Fig. 8-1
Screw cover (3)
Tapping screws (3)
Groove
Clasp
Fig.8-2
8.1.2 Disassembling the electric box
Take out the electric box cover with a bit strength, or
push up the clasps (3) that are fixed into the electric
box inward to take out the electric box cover.(As
shown in Fig.8-3)
Electric box
Electric box cover
Clasps
Fig.8-3
To Next Page
Loading...
