29
Operation procedures/pictures
8.2.3 Disassembling the fan blade, motor and motor support
● Screw off the fixing nut, flap gasket and spring
gasket of the axial cross fan take out the axial flow
fan with strength.(As shown in Fig.8-18)
Fixing nut
Fig.8-18
● Screw off the 4 pieces of tapping screws that fix the
motor and unplug the lead wire insert of the motor
to take it off.(As shown in Fig.8-19)
● Screw off the 2 pieces of tapping screws that fix the
motor support and lift it upward to take off the
motor support.(As shown in Fig.8-19)
Fig.8-19
Motor
Motor support
Tapping screws
(4 pieces)
Tapping screws
To Next Page
Loading...
