30
Operation procedures/pictures
8.2.4 Disassembling the electric box
● Screw off the 2 pieces of screws that fix the electric
box and unplug the lead wire insert of the
compressor, reactor, four-way valve and fan motor
to take out the electric box (As shown in Fig.8-20)
Screws
Fig.8-20
8.2.5 Disassembling the reactor box and reactor
● Screw off the 3 pieces of screws between the reactor
box and the base plate to take out the reactor
box.(As shown in Fig.8-21)
● Screw off the 4 pieces of screws between the reactor
and the base plate to take out the reactor.(As shown
in Fig.8-22)
Screws (3 pieces)
Screws (4 pieces)
Fig.8-21
Fig.8-22
To Next Page
Loading...
