Note: 1Ton =12000Btu/h = 3.517kW
4.3 Location
To ensure the unit in proper function, selection of installation location must be in
accordance with following principles.
(1) Unit shall be installed so that the air discharged by outdoor fan will not
return and that sufficient space for repair shall be provided around the
unit.
(2) The installation site must have good ventilation, so that the unit can take
in and exhaust enough air.
(3) Place of installation shall be strong enough to support the weight of unit,
and it shall be able to insulate noise and prevent vibration. Ensure that the
wind and noise from the unit will not affect your neighbors.
(4) Avoid direct sunshine over the unit. It is better to set up a sun shield as the
protection.
(5) Place of installation must be able to drain the rainwater and defrosting
water.
(6) Place of installation must ensure the unit will not subject to the influence
of rubbish or oil fog.
(7) The installation site must be at a place where the air exhaust outlet does
not face strong wind.
(8) Unit must be fixed on stable and solid surface of floor.
To Next Page
Loading...