Gree GMV-120WL/C-X

GREE DC Inverter Multi VRF System II Service Manual
130
Removal operation of compressor
Remark: Before removing the compressor, please make sure that there’s no refrigerant inside the pipeline and the power
is disconnected.
Process Photo
Operation
Instruction
2. Disconnect
compressor and
connected
pipeline
● Weld suction
pipe
and discharge pipe
of compressor
● then pull out the
connection pipe
from the
compressor
Note: During
welding process, do
not let the flame
burn out other parts.
3. Loose nuts
fixing the foot of
compressor
Twist off the nuts for
compressor with
wrench