Gree GMV-36WL/A-T(U) - Page 121

DC Inverter Side Discharge VRF Ⅱ for North America
119
3. Replace
gas liquid
separator
Weld the pipe
connected with gas
liquid separator
Fix the screws at
the base of gas
liquid separator well
again
Note: During welding
process, do not let
flame burn out other
parts
Removal operation for plate heat exchanger
Remark: Before removing the plate heat exchanger, please make sure that there’s no refrigerant inside the pipeline
of system and disconnect the power
Process
Photo
Operation Instruction
1. Twist off two
nuts fixing the
plate heat
exchanger with
wrench
Twist off two nuts
fixing the plate heat
exchanger with
wrench