GMV5 DC INVERTER VRF UNITS SERVICE MANUAL
357
Note: If your browser is set to English, the login page will be English as well.
If the following page appears, the client PC cannot connect to the server. Possible cause is that the client
PC or the server PC does not connect to the LAN, causing both to fail to communicate.
Troubleshooting procedure is as follows:
1. Check network lines of the server and client and make sure they connect to the LAN;
2. Ping the IP address of the server on the client (for detailed operation, refer to the maintenance
chapter). If Ping succeeds, they can normally communicate; otherwise, the software cannot be used.
To Next Page
Loading...
