GMV BACnet Gateway Technical Service Manual
5
3.EQUIPMENT INSTALLATION
3.1 PRODUCT SIZE AND SPATIAL SIZE FOR ELECTRIC
CONTROL CABINET INSTALLATION
3.1.1 PRODUCT SIZE
L × W × H：296×177×56（mm）
3.1.2 SPATIAL SIZE FOR ELECTRIC CONTROL CABINET
INSTALLATION
BACnet gateway shall be installed in electric control cabinet; the front of gateway shall be
hung upward and fixed with 4 screws. See the following fig (for reference).
Warning! Power cord and communication line of BACnet gateway must conduct routing
separately(the distance shall be over 15cm); otherwise, it might lead to BACnet
gateway communication malfunction!
The thin dotted line is communication line and the thick dotted line is the heavy current wire,
To Next Page
Loading...
