Gree GMV-ND180PHS/B-T Service Manual

GREE GMV5 INDOOR UNIT SERVICE MANUAL
164
Motor and fan
Step
Diagram
Operation Procedure
8. Install and screw the
centrifugal fan.
●Install the centrifugal fan and use
a wrench to screw the centrifugal
fan.
9. Install and screw the
water tray.
●Use a screwdriver to screw the
water tray
Pump
Step
Diagram
Operation Procedure
1. Unscrew the water tray.
●Use a screwdriver to unscrew the
water tray.
2. Remove the water tray.
●Replace the water tray.
3. Remove the drainage
duct and unscrew the pump.
3. Remove the drainage duct and
use a screwdriver to unscrew the
pump.
4. Replace the pump.
●Replace the pump.
5. Connect the drainage
duct and screw the new
pump.
●Connect the drainage duct and
use a screwdriver to screw the
new pump.
6. Install and screw the
water tray.
●Use a screwdriver to screw the
water tray.
Tighten the screws
Loosen the screws
Water tray
2.Unscrew the outlet pipe
1.Remove the drainge duct
1.Screw the outlet pipe
2.Screw the drainge duct
Tighten the screws

Gree GMV-ND180PHS/B-T Specifications

General

Brand	Gree
Model	GMV-ND180PHS/B-T
Category	Air Conditioner
Language	English