EasyManua.ls Logo

Gree GMV-ND112PHS/B-T User Manual

Gree GMV-ND112PHS/B-T
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
Original Instructions
Commercial Air Conditioners
Multi Variable Air Conditioners
Ducted Type Indoor Unit
Models:
GMV-ND22PHS/B-T GMV-ND25PHS/B-T GMV-ND28PHS/B-T GMV-ND32PHS/B-T
GMV-ND36PHS/B-T GMV-ND40PHS/B-T GMV-ND45PHS/B-T GMV-ND50PHS/B-T
GMV-ND56PHS/B-T GMV-ND63PHS/B-T GMV-ND71PHS/B-T GMV-ND80PHS/B-T
GMV-ND90PHS/B-T GMV-ND100PHS/B-T GMV-ND112PHS/B-T GMV-ND125PHS/B-T
GMV-ND140PHS/B-T GMV-ND160PHS/B-T GMV-ND180PHS/B-T

Other manuals for Gree GMV-ND112PHS/B-T

Questions and Answers:

Gree GMV-ND112PHS/B-T Specifications

General IconGeneral
ModelGMV-ND112PHS/B-T
Cooling Capacity11.2 kW
Heating Capacity12.5 kW
RefrigerantR410A
TypeVRF
Outdoor Unit Dimensions (HxWxD)950x340 mm

Summary

Exception Clauses

Safety Notices

Product Introduction

2.1 Names of Key Components

Identifies and illustrates the main parts of the indoor unit.

2.2 Rated Working Condition

Details the operational temperature and humidity parameters for cooling and heating.

Preparations for Installation

3.1 Standard Fittings

Lists and describes the supplied parts required for installation.

3.2 Location for Installation

Provides guidelines for selecting an appropriate installation site for the indoor unit.

3.3 Requirements for Communication Line

Specifies the type and length of cables for unit communication.

3.4 Wiring Requirements

Outlines the necessary specifications for power cords and air switch capacity.

Installation Instructions

4.1 Installation of Indoor Unit

Covers the physical mounting and securing of the indoor unit.

4.2 Refrigerant Pipe Connection

Details the process for connecting refrigerant pipes, including torque specifications.

4.3 Drainage Pipe Installation and Drainage System Testing

Explains how to install the drain pipe and test the drainage system for leaks.

4.4 Installation of Air Duct

Guides the installation of air ducts for supply and return air.

4.5 Installation of Wired Controller

Provides instructions for installing the wired controller.

Wiring Work

5.1 Connection of Wire and Patch Board Terminal

Describes how to connect wires to terminals and patch boards.

5.2 Power Cord Connection

Details the procedures for connecting the unit's power cord.

5.4 Connect Communication Wire of Wired Controller

Outlines the process for connecting communication wires for the wired controller.

5.5 Illuminate for Connection of Wired Controller and Indoor Units Network

Illustrates the network connection for wired controllers and indoor units.

Setting of External Static Pressure

Routine Maintenance

7.1 Cleaning of Filter

Instructions for cleaning the air filters of the indoor unit.

7.2 Maintenance before the Seasonal Use

Steps to perform before the start of the cooling or heating season.

7.3 Maintenance after the Seasonal Use

Tasks to complete after the end of the cooling or heating season.

Table of Error Codes for Indoor Unit

Troubleshooting

Related product manuals