To Next PageTo Next PageWhat to do if the power supply of wired controller is faulted in my Gree GMV-ND112PHS/B-T Air Conditioner?
If the wired controller of your Gree Air Conditioner is not getting power, inspect the power supply connections to ensure they are properly connected.
What to do if my Gree GMV-ND112PHS/B-T says no main indoor unit?
If your Gree Air Conditioner system indicates that there is no main indoor unit, check the connection to the main indoor unit to ensure it is properly connected.
What to do if there is a wrong number of indoor unit for one-to-more indoor unit in Gree GMV-ND112PHS/B-T Air Conditioner?
If you're using a one-to-more indoor unit system with your Gree Air Conditioner and suspect an issue with the number of units, verify the number of connected indoor units.
General| Model | GMV-ND112PHS/B-T |
|---|---|
| Cooling Capacity | 11.2 kW |
| Heating Capacity | 12.5 kW |
| Refrigerant | R410A |
| Type | VRF |
| Outdoor Unit Dimensions (HxWxD) | 950x340 mm |
Identifies and illustrates the main parts of the indoor unit.
Details the operational temperature and humidity parameters for cooling and heating.
Lists and describes the supplied parts required for installation.
Provides guidelines for selecting an appropriate installation site for the indoor unit.
Specifies the type and length of cables for unit communication.
Outlines the necessary specifications for power cords and air switch capacity.
Covers the physical mounting and securing of the indoor unit.
Details the process for connecting refrigerant pipes, including torque specifications.
Explains how to install the drain pipe and test the drainage system for leaks.
Guides the installation of air ducts for supply and return air.
Provides instructions for installing the wired controller.
Describes how to connect wires to terminals and patch boards.
Details the procedures for connecting the unit's power cord.
Explains how to connect communication wiring between units.
Outlines the process for connecting communication wires for the wired controller.
Illustrates the network connection for wired controllers and indoor units.
Instructions for cleaning the air filters of the indoor unit.
Steps to perform before the start of the cooling or heating season.
Tasks to complete after the end of the cooling or heating season.
