GREE GMV5 INDOOR UNIT SERVICE MANUAL
183
Precondition: The power supply has been disconnected.
6. Loosen the centrifugal fan
and motor.
●Use a hexagon to unscrew the
centrifugal fan and loosen the
fasteners of the motor.
●Remove the motor from the
support and remove the centrifugal
fan from the motor axle. Then,
remove the motor.
●For motors that are accompanied
with supports, the supports need
removing as well.
●Assemble units based on the
reverse order of this procedure
and power on the units for test.
To Next Page
Loading...
Need help?
General
