Gree GMV-ND28C/A-T Service Manual

MULTI VRF-Ⅱ INDOOR UNIT SERVICE MANUAL EUROPEAN/LATIN AMETICA (R410A)
38
4
Auto mode (Under Auto mode, the indoor units will automatically select their
operating mode as per the temperature change so as to make the ambient
comfortable.)
5
It shows the setting temperature value(In case the wired controller is controlling a
Fresh Air Indoor Unit, then the
temperature zone will display FAP)
6
Cooling mode
7
Dry mode
8
Fan mode
9
Heating mode
10
When inquiring or setting project number of indoor unit, it displays "NO." icon
11
Floor Heating mode (When Heating and Floor Heating
simultaneously shows up, it indicates 3D Heating is activated.)
12
Display "SET" icon under parameter setting interface
13
Space Heating mode
14
Display "CHECK" icon under parameter view interface
15
Outdoor unit operates under Save mode/upper limit of system capacitor less
100%/remote Save status
16
Sleep status
17
Current set fan speed (including auto, low speed, medium-low speed, medium
speed, medium-high speed, high speed and turbo seven status)
18
Air status, Indoor unit optional function
19
Remind to clean the filter
20
Quiet status (including Quiet and Auto Quiet two status)
21
Allow auxiliary electric heating On icon
22
Light On/Off function
23
X-fan function
24
Health function, Indoor unit optional function
25
Reserved function
26
Out function
27
Outdoor unit defrosting status

Gree GMV-ND28C/A-T Specifications

General

Brand	Gree
Model	GMV-ND28C/A-T
Category	Air Conditioner
Language	English