Gree GMV-VDR5PH/SA-S - Parameters of Filter and Heat Exchange Core

ERV+DX coil
10
(2) The nominal static pressure is the static pressure tested acquiescently when
leaving the factory, other high-level filter might affect unit performance
parameter.
(3) Please use Fresh Air Conditioning Load (Cooling) to do capacity calculation or
selection.
(4) Thermal efficiency is test result that refer to the heating working conditions of
the EU1253 instruction.
(5)
The nominal cooling and heating capacity is the combined capacity of the
outdoor and indoor units of the system with the following operating conditions:
—
Cooling Heating
Indoor Air Inlet
Temperature
27℃ DB/ 19.5℃ WB 20℃ DB/ 12℃ WB
Outdoor Air Inlet
Temperature
35℃ DB/ 28℃WB 7℃ DB/ 6℃ WB
2.5 Parameters of Filter and Heat Exchange Core
Table 2-4 Parameters of filter and heat exchange core
Measuring unit: mm
Model
GMV-
VDR5PH/SA-S
GMV-
VDR8PH/SA-S
GMV-
VDR10PH/SA-
S
Washable
Recyclable
Suggested
replacement
time
Rough
filter
155×382×28 184×530×35 Yes No
Refer to the
tips of wired
controller
after
cleaning for
3 times
Heat
exchange
core
268×386×382 330×450×522 No No 2 years
Rough filter (standard configuration)
Heat exchange core