111
GMV6 DC Inverter VRF Units Technical Sales Guide
f. If there is an obstacle above the unit, install the unit as follows.
In principle, the top of the unit is required to be more than 3000 mm from the top wall. If the space
around the front, back, left and right sides of the unit is open space, the top of the unit is required to be
1500mm or more from the top wall, as shown in the fig. as below. If the size is less than 1500mm, or
if the space around the unit is not open, you need to connect an exhaust duct for smooth ventilation, as
shown below.
To Next Page
Loading...
