Installation instructions
Close the window sash securely
against the Window panel.
5
Cut the foam seal to an approp-
riate length and seal the opening
between the top of the inner
window sash and the outer
window sash.
6
Attach a bracket with the screw.
7
23
Foam seal A
(adhesive type)
Adjustment panel
Extension panel
24"~36.8"
36.8"~48"
Bracket
If the inner width of the window is bet-
ween 24" (609mm) and 36.8"(934mm)
inclusive.
(1) Open the window sash and place the
window panel on the window stool.
(2) Slide the adjustment panel to fit the
window frame width.
(3) Secure the window panel to the stool
with screws.
If the inner width of the window is bet-
ween 36.8" (934mm) and 48" (1219mm)
inclusive.
(1) Attach the extension panel to the
adjustment panel.
(2) Open the window sash and place the
window panel on the window stool.
(3) Slide the adjustment and extension
panels to fit the window frame width.
(4) Secure the window panel to the window
stool with screws.
Cut the foam seals (adhesive type) A
and B to the proper length and attach
it to the window panel.
4
Attach foam seal A to the window panel
and extension panel, and attach foam
seal B to the adjustment panel.
To Next Page
Loading...
