U-Match Series Duct Type Unit
41
WARNING
⑧.
When connecting the power cord, make sure the phase sequence of the
power supply matches with the
corresponding terminals, otherwise the
compressor will get reversed and operate abnormally.
1) Indoor side
Take off the electric box cover from the sub-assembly of electric box. Then
connect the wires. Connect the connection wires of indoor unit according to the
corresponding marks.
2) Outdoor side
Remove the big handle/front panel of the outdoor unit and insert one end of the
communication cord and the power cord to the terminal board.
GU50W/A1-K, GU71W/A1-K,GU85W/A1-K
To Next Page
Loading...