GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
83
Removal of Front Panel
NOTE: Before removing the front panel, make sure power is cut off.
Step Picture Work Instruction
7. Install the handle and the
valve cover.
Install the valve cover by
mounting on 3 clasps on its
both sides.
8. Install the front panel.
Install the front panel by
mounting on 6 clasps on its
both sides. Please note
that there is one screw on
the lower right side.
9. Install the grill.
Attach the grill back in
place and tighten up the
screws.
To Next Page
Loading...
