Gree GUD24W2/D-D(U)

To Next Page

To Previous Page

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL

Model:

GUD42W2/D-D(U), GUD48W2/D-D(U), GUD60W2/D-D(U)

Removal of Compressor/Gas Liquid Separator

NOTE: Before removing the compressor/gas liquid separator, make sure there is no refrigerant in the pipeline and power is cut off.

Step Picture Work Instruction

1. Remove

wires.

 Loosen the securing

screws of the wires with

a screwdriver.

 Remove the wires.

NOTE: When removing

the wires, mark the wire

terminals

corresponding to their

color so as to avoid

misconnection.

2. Break off the

pipes that

connecting to

the

compressor/g

as liquid

separator.

 Weld the pipes that are

connected to the

compressor/gas liquid

separator.

 Then remove the pipes.

NOTE: When welding

the pipes, do not let the

flame burn the other

components.

3. Loosen the

compressor’s

base

connectors.

 Use a wrench to twist

off the compressor’s

base nuts.

Gree GUD24W2/D-D(U) - Page 90