Gree GUD24W2/D-D(U) - Page 91

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
88
Removal of Compressor/Gas Liquid Separator
NOTE: Before removing the compressor/gas liquid separator, make sure there is no refrigerant in the pipeline and power is cut off.
Step Picture Work Instruction
4. Remove the
compressor
from the
chassis.
 Take away the
compressor and
replace with a new one.
NOTE: When replacing
the compressor, avoid
touching the nearby
pipeline and
components.
5. Loosen the
gas liquid
separator’s
base nuts.
 Use a wrench to twist
off the gas liquid
separator’s base nuts.
6. Remove the
gas liquid
separator
from the
chassis.
 Take away the
compressor and
replace with a new one.
NOTE: When replacing
the compressor, avoid
touching the nearby
pipeline and
components.