Gree GUHD series - Buttons

80DWFK6HULHV'&
,QYHUWHU6HUYLFH0DQXDO
43
DPOUSPM
3.1.2 Instruction to LCD Display
No. Description Instruction to Displaying Contents
1
Swing Swing function
2 Air
Air exchange function
3
Sleep Sleeping states
4
Running mode Each kind of running mode of indoor unit (auto mode)
5
Cooling Cooling mode
6
Dry Dry mode
7
Fan Fan mode
8
Heating Heating mode
9
Defrost Defrosting state
10 Gate-control card
*
Gate control
11
Lock Lock state
12
Shield Shielding state (buttons, temperature, on/off, mode or save is shielded by long-distance monitoring
13
Turbo Turbo function state
14
Memory Memory state (Indoor unit resumes original setting state after power failure and then power recovery)
15
Twinkle Flicking when unit is on without operation of buttons
16
Save Energy-saving state
17
Temperature Ambient/setting temperature value
18 E-Heater
*
Mark that E-heater is allowed to turned on
19
Blow Blow mark
20
Timer Timer-displayed location
21 Quiet Quiet state(two types: quiet and auto quiet)
Notes: The functions with * are reserved for other models and are not applicable for the models listed in this manual.
3.2 Buttons
3.2.1 Silk Screen of Buttons
Fig. 4-2-1 Silk screen of butto