OFF
10234
8
7
65
13
OPERATION OF WIRELESS REMOTE CONTROLLER
X-Fan Mode Display
Swing Louver Display
VERTICAL SWING LOUVERS
• Press the Vertical Swing Louver button to select five
different vertical (up & down) air discharge directions
including Continuous Sweep. The Vertical Swing Louver
icon will be displayed. Press this button to set
swing angle, which circularly changes as below:
Indicates louver swings back and forth in the five
places, as shown in the figure.
X-FAN MODE
When operating in humid areas,
neo
has a DRY COIL function
called X-Fan that will allow the indoor fan to run for a pre-determined
amount of time after the unit is turned off (cooling or dry modes)
to ensure that additional moisture is removed from coil. Push the
“X-FAN” button to enable this feature. The X-FAN icon will
be displayed on remote controller. To deactivate this feature, push
the “X-FAN” button again.
To Next Page
Loading...
