Service Manual
Steps Procedure
7.Remove electric box
Twist off the screws on electric box, cut off the
tieline with scissors or pliers, pull out the wiring
terminal, pull it upwards to remove the electric
box.
Twist off the screws on electric box (fireproofing)
with screwdriver, and then remove the electric
box (fireproofing).
electric box
(fireproofing)
8.Remove motor
Twist off the tapping screws fixing the motor, pull
out the pin of leading wire for motor and then
remove the motor.
motor
96
£ Installation and Maintenance
To Next Page
Loading...
