S2S KNX Gateway
22
Object# 10
Name Upper limit Temp. of Heat energy saving – Control
Function
Set the upper heating temperature limit of air
conditioner
Description
Transmission value = actual value, actual value:
16.0~30.0;Reserved.
Read/Write Write
Type of data point 2 byte
Object# 11
Name
Lower limit Temp. of Dehumidify energy saving –
Control
Function
Set the lower dehumidifying temperature limit of air
conditioner
Description
Transmission value = actual value, actual value:
16.0~30.0;Reserved.
Read/Write Write
Type of data point 2 byte
Object# 12
Name Sleep – Control
Function Set the sleeping function of air conditioner
Description 1: ON, 0: OFF
Read/Write Write
Type of data point 1 bit
To Next Page
Loading...
