Need help?Do you have a question about the Gree ME30-44/D2 B and is the answer not in the manual?
Describes the function of the Gree BACnet gateway for VRF units and BMS integration.
Details the default TCP/IP parameters such as IP address, subnet mask, and default gateway.
Explains the physical layout and function of the gateway's interface ports.
Details the 24V DC power input requirements and limitations for the gateway.
Explains the functionality of various communication ports like CAN, RS485, USB, and Ethernet.
Explains the status and communication indicators (LEDs) on the gateway.
Describes the function of the SHT/DWN and BACKUP buttons on the gateway.
Provides instructions and diagrams for setting the DIP switches for gateway configuration.
Explains how the gateway connects to a Building Management System (BMS).
Illustrates the network topology for connecting the gateway to units and BMS.
Provides the physical dimensions of the BACnet Protocol Gateway in millimeters.
Details the requirements for installing the gateway within an electric control cabinet, including mounting.
Specifies the types of wires and their specifications for communication lines.
Illustrates connection methods between the gateway, BMS, and AC units.
Details configuration steps for connecting the gateway to PCs and AC units.
Initiates the TCP/IP setting process by accessing Windows Settings via the Start menu.
Proceeds to the Network & Internet settings within Windows.
Accesses the Network and Sharing Center from the Network & Internet interface.
Selects the Ethernet connection and opens the Ethernet Status window.
Opens the Ethernet Properties window by clicking the Properties button.
Navigates to the Internet Protocol Version 4 (TCP/IPv4) properties.
Configures IP address, subnet mask, and default gateway for the network equipment.
To Next Page
General
