Gree ME30-44/D2 B - Product Installation Guide; Product Size Specifications; Electric Control Cabinet Installation Space

BACnet Protocol Gateway
9
7 Product Installation
7.1 Product Size and Spatial Size for Electric Control Cabinet
Installation
7.1.1 Product Size
Fig. 7.1 Gateway product size chart
Notice for installation and operation:
（1） Ensure the specification of power input. Otherwise, Gateway can’t work
normally or even be damaged.
（2） Ensure the dial code setting of Gateway is correct. Otherwise, there will
be communication malfunction.
（3） Ensure that the communication cord has connected to the correct
interface. Otherwise, there will be communication malfunction.
（4） Do not place Gateway in direct sunlight or high-temperature and humid
environment. Place it in the central control cabinet.
7.1.2 Spatial Size for Electric Control Cabinet Installation
Gateway shall be installed in electric control cabinet; the front of gateway shall
be hung upward and fixed with 4 screws. See the following fig (for reference).