Gree SXD200LCJW/C1-K - Models List

AIR SOURCE HEAT PUMP WATER HEATER SERVICE MANUAL
2
PRODUCT
1 MODELS LIST
Product type - Model Product code
Heating
capacity(W)
Outline diagram
Split type
Water tank SXD200LCJW/C1-K ER20000320
2800+1500
(electric
heating)
Outdoor unit GRS-S3.0G/NbA-K ER02000130
Product type Model Product code
Heating
capacity(W)
Outline diagram
Integral type GRS-2.4/D270ANbA-K ER02100050
2400+1500
(electric
heating)
Notes:
The above table lists specifications of the air source water heater series product for static heat up.
The product standard is EN16147-2011, (EU) No 814/2013, EN 12102-2008.
Conditions for testing heating capacity of the unit: outdoor ambient temperature: 20 DB/15 WB;
Initial/ending water temperature in the water tank: 15 /55 .
For units with a water tank equipped with an electrical heater, that is, the water tank model of which
includes D , both the heat pump and electrical heater are started for heat up under low ambient
temperature or rapid mode.
If the product specification changes with product improvement, refer to the parameter specified on
the nameplate.