AIR SOURCE HEAT PUMP WATER HEATER SERVICE MANUAL
4
5
Finned tube
exchanger
Provides heat exchange channel for refrigerant and air.
6 Fan motor
Enhances heat exchange on the air side of the finned tube exchange
and provides a low-temperature heat source continuously.
7 Filter
Filters impurities in refrigerant to protect components with small
diameter.
4 PRODUCT PARAMETERS
4.1 Product Parameters of Split type unit
4.1.1 Product Parameters of Outdoor Unit
Model GRS-S3.0G/NbA-K
Product code - ER02000130
Rated Heating Capacity
(
*
)
W 2800
Rated Input Power
(
*
)
W 700
COP
(
*
)
W/W 4.00
Load Profile - L
COP
DHW
(
**
)
W/W 2.90
Energy Efficiency Class
(
**
)
- A
Water Heating Energy Efficiency
(
**
)
- 110%
Annual electricity consumption
(average climate conditions)
kWh 878
Maximum Input Power W 1180+1500W (Electric Heater)
Outlet Water Temperature Default: 55 , 35 ~70
Power Supply - 220V-240V ~50Hz
Insulation Level -
Protection of Ingression -
PX4
Refrigerant
Name R134a
Charge kg 1.20
Outline Dimensions W x D x H mm
Package Dimensions W x D x H mm
Net Weight kg 35.5
Sound Power Level
(
***
)
dB(A) 61
Operating Range -7~45
Notes:
(
*
)
Value obtained
(
**
)
, as per EN16147, (EU)
No 814/2013.
(
***
)
Value obtained as per EN 12102-2008.
Under fast water heating mode, electric heater helps to heating water.
Please always see the nameplate for the exact data as this table is subject to change.
To Next Page
Loading...
