User Notice
Please carefully read this manual before installation and use of this product
◆
Ensure unied power supply for each indoor unit.
◆
Never install wired controller in wet place or under sunlight directly.
◆
Shielded twisted pair line must be adopted as signal line or wiring (communication) of wired
controller once the unit is installed in the place where there is electromagnetic interference.
◆
Make sure communication line is connected into correct port to avoid communication
malfunction.
◆
Never knock, throw or frequently disassemble the wired controller.
◆
Never operate the wired controller with wet hand.
To Next Page
Loading...
